24V DC swing gate automation kit for remote-controlled access through a single gate, supplied with batteries, charging adaptor and two remotes.
Gate capacity: Operates a single swing gate up to 380kg at 1.2–1.8m long, with lower weight limits for longer gates.
24V DC operation: Two supplied 12V 7Ah batteries power the motor, with a charging adaptor to maintain their charge.
Smooth gate movement: Adjustable soft stop slows the gate near the end of travel for a more controlled finish.
Manual release: Keyed release allows the gate to be moved by hand when power is unavailable or maintenance is needed.
Remote-controlled access: Two handheld remotes let you open and close the gate without leaving your vehicle.
Flexible opening direction: Supports inward pull-to-open or outward push-to-open layouts when installed with the required clearances.
Automatic closing: Optional auto-close returns the gate to the closed position after an adjustable delay of 3–120 seconds.
Mounting hardware included: Supplied gate and post brackets, pivot bracket and fixings connect the actuator to the gate assembly.
Description
The GTR099 converts a single manual swing gate into a remote-controlled entrance for residential driveways and vehicle-access gates. Its 24V DC actuator connects between the gate and post, moving the gate through its opening and closing arc. Two handheld remotes let you operate the entrance from your vehicle, removing the need to get out and move the gate by hand.
The motor runs from two supplied 12V 7Ah batteries, with the included charging adaptor maintaining their charge. Adjustable soft stop provides a more controlled end to gate movement, while optional automatic closing returns the gate after a delay set between 3 and 120 seconds. The keyed manual release allows the gate to be moved by hand when needed.
The kit supports both pull-to-open and push-to-open installations. It includes the actuator, control box, gate and post brackets, pivot bracket, fixings, two remotes, release key and warning signs. Gate length and weight must be checked together: the capacity is 380kg at 1.2–1.8m, reducing to 300kg at 3m and 110kg at 5.5m. The full length-dependent ratings are listed in the specifications.
Fit the opener to a correctly installed gate that swings freely, with sufficient clearance throughout its travel. The control board supports photocell safety sensors; the installation must include the safeguards specified in the manual, and pedestrians need a separate access opening. The system can also be converted to low-voltage or solar power with suitable additional equipment and Richmond’s technical guidance.
Our Stainless Excel Series castors offer the same European design pressed metal
frame with a 304 stainless finish and bearings suited to wet and hygiene environments