Hard-wired push button opens a compatible automatic gate from a fixed entry or exit point.
One-touch gate access: Press the button to operate the connected gate without using a handheld remote.
No batteries required: Connects directly to the opener through two-core cable, avoiding keypad or remote battery changes.
Post or wall mounting: Can be positioned at a convenient fixed access point beside the gate.
Outdoor housing: IP54-rated case is suitable for outdoor use when installed as instructed.
Multiple access points: More than one button can be fitted to provide separate entry and exit controls.
Momentary switch: Normally open contact sends a brief command when pressed, for controllers with a compatible push-button input.
Description
The GTR202 provides a fixed push-button control for a compatible automatic gate or garage opener. It suits entry and exit points where users need to operate the gate without carrying a remote. The button can be mounted on a post or wall, with a two-core cable connecting it to the opener’s push-button input.
The momentary, normally open switch sends a command when pressed. Gate behaviour follows the connected controller and its settings. Multiple buttons can be fitted at different positions, and a compatible Richmond motor’s auto-close function can be enabled where appropriate for the installation.
The unit has an IP54-rated outdoor case and measures 70mm wide, 70mm deep and 70mm high. It needs no batteries. Connection wire is not included, so allow for the cable run when planning installation. Follow the manual’s cable-entry instructions, including locating the entry underneath the housing to minimise water ingress.
Switch Action
Momentary
Contact Type
Single normally open contact
Connection
Two-core hard-wired connection
IP Rating
IP54
Width
70mm
Depth
70mm
Height
70mm
Sliding/cantilever motors
GTR156, GTR212, GTR061, GTR207 and GTR510
Swing motors
GTR099, GTR058, GTR062, GTR078, GTR500, GTR501, GTR502 and GTR503
Our Stainless Excel Series castors offer the same European design pressed metal
frame with a 304 stainless finish and bearings suited to wet and hygiene environments