Gate End Catches, Sliding Gate Stops & Rubber Gate Stoppers
Richmond supplies a range of gate end catches, sliding gate end stops and rubber gate stoppers for residential, commercial and industrial gate installations. Our range includes standard gate end catches, ground-mounted gate catches, double guide roller end stops and gate stoppers in different sizes and configurations.
Designed to help control gate movement at the end of its travel, Richmond’s gate stops and end catches are used on suitable manual and automated gate systems across driveways, warehouses, workshops, manufacturing plants and industrial sites. These components provide mechanical stopping or receiving points that help maintain gate positioning and reduce unwanted movement.
Whether you need a sliding gate end catch for a driveway entrance, a ground-mounted gate catch for a compatible gate arrangement or a rubber gate stopper for cushioning contact, Richmond offers practical options for new installations, maintenance and replacement work.
Sliding Gate End Stops & Catches for Controlled Gate Movement
Gate end catches and stops form part of the mechanical hardware used to manage gate movement at the open or closed position. Depending on the design, an end catch can provide a receiving point for the gate, while a gate stopper provides a physical contact point that helps limit movement.
Richmond supplies different configurations to suit compatible gate layouts, including standard end catches, ground-mounted catches, roller-style end stops and rubber stopping components. These products are relevant to residential driveway gates, commercial entrances and industrial access gates.
For sliding gates, end catches and stops should be selected in conjunction with the gate frame, running wheels, guide rollers and track arrangement. Correct positioning is important to ensure the gate reaches its intended stopping point without unnecessary impact or misalignment.
Automated sliding gates also require appropriate travel control and safety systems. Mechanical stops should be selected and installed according to the gate and motor manufacturer’s requirements, and should not be treated as substitutes for required electrical limits or safety devices.
When selecting a sliding gate end stop, consider the gate’s dimensions, direction of travel, mounting location, expected contact forces and operating environment. Richmond’s range includes different stopping and catching arrangements for suitable installations.
Explore Richmond’s wider Sliding Gate Hardware range for compatible wheels, tracks and guide components.
Product Types by Application
Standard Gate End Catches
Richmond supplies the Gate End Catch (GTR019) and Gate End Catch (GTR052) for compatible gate installations. These products provide end-catching options for suitable gate frames and mounting arrangements.
Standard gate end catches are relevant to residential driveways, commercial entrances and industrial sliding gates where a receiving point is required at the end of travel. The correct catch should be selected according to the gate construction, alignment and intended contact position.
Ground-Mounted Gate End Catches
The Ground Mounted Gate End Catch (GTR260) provides a ground-mounted catching option for suitable gate installations. Its mounting arrangement allows the catch to be positioned at an appropriate point on the supporting surface.
Ground-mounted catches are relevant to installations where the gate design and site conditions suit a receiving component fixed at ground level. Installers should consider the supporting surface, fixing method, gate clearance and intended contact position.
Double Guide Roller Gate End Stops
The Gate End Stop – Double Guide Rollers (GTR264) provides an end stop configuration incorporating double guide rollers for compatible sliding gate arrangements.
This product is relevant to gate installations requiring a roller-style guidance arrangement at the stopping position. The gate frame dimensions, roller clearance and mounting position should be checked to ensure the assembly suits the intended application.
80mm & 90mm Gate Stoppers
Richmond supplies the 80mm Gate Stopper (GTR017) and 90mm Gate Stopper (GTR018) for suitable gate stopping applications. These products provide different nominal size options within Richmond’s gate stopper range.
Gate stoppers are used where a physical stopping point is required to limit gate movement. The appropriate size and mounting arrangement depend on the gate design, required stopping position and expected contact conditions.
Rubber Gate Stoppers
The 65mm High Rubber Gate Stopper (GTR165) provides a rubber stopping component for suitable gate installations. Its 65mm nominal height offers a defined size option for planning the stopping arrangement.
Rubber gate stoppers provide a resilient contact surface that can help cushion suitable gate contact. They are relevant to residential, commercial and industrial applications where the gate design and expected stopping forces are compatible with a rubber stopper.
Specialty Product Options
Gate End Catch GTR019
The Gate End Catch (GTR019) provides a mechanical end-catching option for compatible gate systems. It can be considered when planning a receiving point for a gate at the end of its travel.
This product is relevant to new gate construction and suitable replacement work. Installers should confirm the catch dimensions, mounting requirements and compatibility with the gate frame before installation.
Gate End Catch GTR052
The Gate End Catch (GTR052) provides an alternative end-catching component within Richmond’s gate hardware range.
This option is relevant to residential, commercial and industrial gates requiring a compatible catch arrangement. Selection between GTR052 and other end catches should be based on the product dimensions, mounting configuration and intended gate application.
Ground-Level Gate Catch Installation
The Ground Mounted Gate End Catch (GTR260) is designed for suitable ground-mounted catching arrangements. It provides an alternative to catches installed on posts or other supporting structures.
Ground-level installation requires consideration of the surface material, mounting fasteners, drainage and exposure to debris. The catch should be positioned to suit the gate’s travel and avoid interference with its running wheels or other components.
Double Roller End Stop Arrangements
The Gate End Stop – Double Guide Rollers (GTR264) combines an end stop arrangement with double guide rollers for compatible gate systems.
Roller-style end stop arrangements require suitable alignment with the gate frame. Correct positioning helps the gate enter the intended guide area without binding or excessive lateral pressure.
80mm Gate Stopping Components
The 80mm Gate Stopper (GTR017) provides a nominal 80mm size option for suitable gate stopping arrangements.
This stopper may be considered for residential and commercial installations where its dimensions and mounting requirements suit the gate. The intended contact point and available clearance should be checked before selection.
90mm Gate Stopping Components
The 90mm Gate Stopper (GTR018) provides a nominal 90mm size option within Richmond’s gate stopper range.
This product offers an alternative for installations requiring a different stopper size. The correct selection depends on the gate geometry, stopping position, mounting arrangement and expected operating conditions.
65mm High Rubber Gate Stoppers
The 65mm High Rubber Gate Stopper (GTR165) provides a rubber contact surface for compatible gate stopping applications.
Rubber construction can help cushion contact compared with a rigid stopping surface. The stopper must still be selected for the expected contact forces and installed on a suitable supporting structure.
Gate End Stops for Automated Sliding Gates
Automated sliding gates require controlled travel and suitable mechanical stopping arrangements. End catches and stops may form part of the overall gate installation, depending on the motor system and gate design.
Mechanical end stops must be compatible with the automation equipment and should not replace required limit controls or safety devices. Installers should follow the gate motor manufacturer’s instructions and applicable safety requirements.
Replacement Gate End Catches & Stops
Gate end catches and stoppers can become damaged, loose or misaligned through repeated contact, movement and outdoor exposure. Richmond supplies individual replacement options for compatible gate installations.
When replacing an existing component, confirm the mounting dimensions, contact position and suitability for the gate. The surrounding structure and gate alignment should also be inspected to identify any underlying cause of damage.
Gate Stop Positioning & Alignment
Correct positioning is important for reliable operation of gate catches and stops. The gate should reach its intended stopping point without excessive impact, interference or unintended movement.
Installers should assess the gate’s full travel, running track, guide rollers and frame alignment before fixing the stopping component. For automated gates, the stopping arrangement should be coordinated with the motor’s travel settings and safety systems.
Applications by Industry
- Residential Properties: Gate End Catches and Rubber Gate Stoppers for suitable manual and automated driveway gates.
- Commercial Properties: Sliding Gate End Stops and Ground-Mounted Gate Catches for vehicle entrances and commercial access gates.
- Manufacturing & Industrial Sites: Gate End Catches and Mechanical Gate Stoppers for suitable industrial sliding gates and workshop entrances.
- Warehousing & Logistics: Sliding Gate End Stops and Double Guide Roller Stops for warehouse entrances, delivery access points and vehicle gates.
- Gate Manufacturers & Fabricators: Gate End Catches, Ground-Mounted Catches and Rubber Gate Stoppers for new gate construction.
- Gate Automation Installers: Compatible Gate End Stops and Catches for automated sliding gate installations requiring suitable mechanical stopping arrangements.
- Property Maintenance: Replacement Gate End Catches and Gate Stoppers for repairing worn or damaged gate hardware.
- Rural Residential & Agricultural Properties: Gate End Catches and Stoppers for suitable driveway entrances and property access gates.
Industrial Equipment Solutions Across Australia
Richmond is a leading Australian supplier of gate end catches, sliding gate end stops, ground-mounted gate catches and rubber gate stoppers for residential, commercial and industrial applications. Our range provides practical options for new gate construction, replacement of worn components and maintenance of existing installations.
For standard catching arrangements, Richmond supplies the Gate End Catch (GTR019) and Gate End Catch (GTR052). Additional configurations include the Ground Mounted Gate End Catch (GTR260) and Gate End Stop – Double Guide Rollers (GTR264).
For gate stopping applications, the range includes the 80mm Gate Stopper (GTR017), 90mm Gate Stopper (GTR018) and 65mm High Rubber Gate Stopper (GTR165).
Complete your gate installation with compatible Sliding Gate Track Wheels, Sliding Rollers and Guides and Sliding Gate Tracks. Explore Richmond’s wider Gate Hardware range for additional components.
Backed by Australia-wide supply, product expertise and in-house engineering capability, Richmond supports gate manufacturers, fabricators, installers, maintenance contractors and industrial buyers with practical gate hardware solutions.
Browse Richmond’s Gate End Catches and Stops range, or contact Richmond for assistance selecting suitable end catches, stoppers and compatible gate hardware.