Sliding Gate Tracks & Gear Racks
Richmond supplies a comprehensive range of sliding gate tracks, sliding gate gear racks and gate track accessories for residential, commercial and industrial sliding gate installations. Our range includes galvanised steel bolt-down tracks, in-ground sliding gate tracks, V-groove gate tracks, steel and nylon gear racks, track joiners and mounting fasteners.
Designed to support smooth and consistent gate movement, Richmond’s sliding gate track systems provide the running surface for compatible sliding gate wheels, while gear racks transfer movement from automatic sliding gate motors to the gate. These components are used in manual and automated gate installations across driveways, warehouses, workshops, manufacturing plants and commercial properties.
With over a decade of experience in gate hardware, Richmond offers surface-mounted and recessed track options to suit different installation requirements. Whether you need a 3m galvanised sliding gate track, an in-ground gate track or a nylon gear rack for an automatic sliding gate, our range provides practical options for new installations, upgrades and maintenance.
Explore Richmond’s Sliding Gate Track Wheels, Sliding Gate Motors and Sliding Rollers and Guides for related components.
Sliding Gate Track Systems for Manual & Automatic Gates
Sliding gate tracks provide a defined running surface that allows compatible gate wheels to support and move a gate along its travel path. Correct track selection and installation are important for maintaining gate alignment, reducing unnecessary rolling resistance and supporting consistent operation.
Richmond supplies bolt-down sliding gate tracks for surface-mounted installations and in-ground sliding gate tracks for applications requiring a recessed running arrangement. Available products include 1m and 3m galvanised bolt-down tracks, a 3m V-groove track and a 5.8m in-ground track.
For automated sliding gates, gate gear racks provide the mechanical connection between the motor’s drive pinion and the moving gate. Richmond offers steel and nylon gear rack options, including bolt-on nylon gear rack sections, for compatible motorised gate installations.
Track selection should account for the gate weight, wheel groove profile, ground conditions, required travel distance and installation method. Gear rack selection should consider the motor pinion, rack dimensions, mounting arrangement and operating requirements.
Richmond also supplies track joiners, anchor bolts, mounting fasteners and installation accessories to support suitable gate construction and maintenance projects.
Product Types by Application
Bolt-Down Sliding Gate Tracks
Bolt-down sliding gate tracks are designed to be fixed to a suitable supporting surface, providing a running path for compatible sliding gate wheels. Richmond supplies the 1m Bolt Down Sliding Gate Track – Galvanised (GTR091) and 3m Bolt Down Sliding Gate Track – Galvanised (GTR010).
These tracks are used on residential driveways, commercial entrances and industrial sliding gate installations where a surface-mounted track arrangement is appropriate. The supporting surface must be suitable for the track fasteners and gate loads, with accurate alignment maintained along the travel path.
V-Groove Sliding Gate Tracks
The 3m Bolt Down Sliding Gate Track – V Groove – Galvanised (GTR280) provides a galvanised steel track option with a V-groove running profile. V-groove tracks are designed to work with compatible V-groove sliding gate wheels.
These tracks are relevant to manual and automated sliding gates where the wheel and track profiles are matched. Correct installation helps maintain wheel contact and consistent gate movement across the entrance.
In-Ground Sliding Gate Tracks
The 5.8m In-Ground Sliding Gate Track (GTR046) provides a recessed track option for suitable sliding gate installations. In-ground tracks are installed within a prepared surface rather than mounted entirely above it.
This configuration can be useful for new driveway construction, commercial entrances and industrial sites where a recessed running track is required. Installation should account for ground preparation, track alignment, drainage and the intended wheel profile.
Steel Sliding Gate Gear Racks
The Steel Gear Rack (GTR039) provides a steel drive rack option for compatible automatic sliding gate motors. The gear rack attaches to the moving gate and engages with the motor pinion to transfer powered movement.
Steel gear racks are relevant to suitable residential, commercial and industrial sliding gate automation systems. Correct engagement with the motor pinion, mounting height and rack alignment are important for reliable operation.
Nylon Sliding Gate Gear Racks
Richmond supplies the Nylon Gear Rack (GTR020) and 4 x 1M Bolt on Gear Racks – Nylon (GTR092) for compatible sliding gate automation installations. These products provide nylon rack options for transferring drive from a suitable gate motor.
Nylon gear racks are used on motorised residential and commercial sliding gates where the motor and installation requirements support their use. The correct rack profile, mounting method and motor compatibility should be confirmed before installation.
Sliding Gate Track Joiners
The Joiner Pin for Sliding Gate Track (GTR090) provides a joining component for compatible sliding gate track sections. Track joiners help installers connect suitable track lengths when constructing a longer gate travel path.
These components are useful for residential, commercial and industrial gates requiring multiple track sections. Accurate joining is important to minimise uneven transitions that could affect wheel movement.
Sliding Gate Track Mounting Fasteners
Richmond supplies mounting hardware for bolt-down sliding gate tracks, including the M6.5 x 35mm Anchor Bolt (GTR174), M6.5 x 55mm Anchor Bolt (GTR175) and M6.5 x 38mm Nail-In Mushroom Anchor – 8 Pack (NIA380ZPK8).
These fasteners provide installation options for suitable track mounting arrangements. The correct anchor type and length should be selected according to the supporting material, track requirements and installation conditions.
Specialty Product Options
Galvanised Steel Sliding Gate Tracks
Richmond’s galvanised bolt-down tracks provide a corrosion-resistant steel track option for outdoor sliding gate installations. The range includes the 1m GTR091, 3m GTR010 and 3m V-groove GTR280 configurations.
Galvanised sliding gate tracks are relevant to residential driveways, commercial properties and industrial entrances exposed to outdoor conditions. Track selection should account for wheel compatibility, installation surface and the required gate travel distance.
1m & 3m Bolt-Down Track Lengths
Richmond offers galvanised bolt-down sliding gate tracks in 1m and 3m lengths. The 1m Bolt Down Sliding Gate Track (GTR091) provides a shorter section, while the 3m Bolt Down Sliding Gate Track (GTR010) is suitable for installations requiring a longer continuous section.
These lengths allow installers to plan the track layout according to the gate’s full travel requirements. Where multiple sections are needed, compatible joining hardware and accurate alignment should be used to maintain a consistent running surface.
Recessed Track Installation
The 5.8m In-Ground Sliding Gate Track (GTR046) provides an option for installations requiring the running track to be incorporated into the ground surface. Recessed track systems are typically considered during new construction or substantial driveway works.
These installations require suitable ground preparation and accurate positioning. Drainage, debris accumulation, supporting surface strength and future maintenance access should also be considered.
Bolt-Down Gate Track Bends
The Bolt Down Gate Track Bend (GTR272) provides a track component for specialised sliding gate layouts requiring a compatible curved track arrangement.
Track bends are relevant to installations designed for a non-standard gate travel path. The gate, wheels and guidance system must be suitable for the intended geometry, and the bend should not be assumed compatible with every conventional straight-running sliding gate.
Steel vs Nylon Gear Racks
Richmond supplies both steel and nylon sliding gate gear racks. The Steel Gear Rack (GTR039) provides a metal rack option, while the Nylon Gear Rack (GTR020) and GTR092 bolt-on nylon rack set provide alternative material and mounting configurations.
Gear rack material should be selected according to the motor manufacturer’s requirements, gate operating conditions and installation method. Correct tooth engagement and rack alignment are essential regardless of material.
Bolt-On Nylon Gear Rack Sections
The 4 x 1M Bolt on Gear Racks – Nylon (GTR092) provides four 1m nylon gear rack sections for compatible automatic sliding gate installations. Sectioned gear racks allow installers to arrange the drive rack along the required gate travel length.
These products are relevant to residential and commercial gate automation projects where bolt-on nylon rack construction is appropriate. Each section must be correctly positioned and joined to maintain consistent engagement with the motor pinion.
Gate Track Anchors & Installation Hardware
Richmond supplies the M6.5 x 35mm Anchor Bolt (GTR174), M6.5 x 55mm Anchor Bolt (GTR175) and M6.5 x 38mm Nail-In Mushroom Anchor – 8 Pack (NIA380ZPK8) for suitable mounting applications.
Track fasteners must be selected for the substrate and expected installation loads. Correct drilling, spacing and fastening help maintain track alignment and prevent movement during gate operation.
Drilling Accessories for Gate Track Installation
The 6.5mm Drill Bit for Gate Track Fasteners (GTR178) provides a drilling accessory for suitable gate track fastening work. It can be considered alongside compatible Richmond track anchors and mounting hardware.
Installers should confirm the required drill diameter, drilling depth and substrate suitability against the selected fastener’s installation instructions. Accurate hole preparation supports correct anchor installation.
Aluminium Slide Block Guide Channels
The Aluminium Slide Block Guide Channel (GTR231) provides an aluminium guide channel component for compatible sliding gate guidance arrangements. It is part of Richmond’s wider sliding gate track and hardware range.
Guide channels are relevant to specialised sliding gate systems where a compatible slide block and channel arrangement is required. The channel dimensions, mounting configuration and associated guide components should be checked before installation.
Track, Wheel & Motor Compatibility
Sliding gate tracks must be matched to suitable sliding gate track wheels, while automated installations also require compatible sliding gate motors and gear racks. Track profile, wheel groove and gear rack engagement all affect the complete gate system.
Correct component matching is important for smooth operation, accurate alignment and reduced wear. Gate weight, travel distance, mounting clearances and the condition of the supporting structure should be assessed before selecting hardware.
Applications by Industry
- Residential Properties: Galvanised Sliding Gate Tracks and Nylon Gear Racks for manual and automatic driveway gates.
- Commercial Properties: Bolt-Down Sliding Gate Tracks, Steel Gear Racks and Mounting Hardware for suitable vehicle entrances and access gates.
- Manufacturing & Industrial Sites: Sliding Gate Tracks and Gear Racks for industrial access gates, workshop entrances and external equipment yards.
- Warehousing & Logistics: Galvanised Gate Tracks and Automatic Gate Gear Racks for warehouse entrances, delivery access points and vehicle gates.
- Gate Manufacturers & Fabricators: Bolt-Down Tracks, In-Ground Tracks, Gear Racks and Guide Channels for new sliding gate construction.
- Gate Automation Installers: Steel and Nylon Gear Racks for compatible automatic sliding gate motors and automation upgrades.
- Property Maintenance: Sliding Gate Track Joiners, Mounting Anchors and Replacement Gear Racks for servicing existing sliding gate installations.
- Rural Residential & Agricultural Properties: Galvanised Sliding Gate Tracks and Gear Racks for suitable driveway entrances and property access gates.
Industrial Equipment Solutions Across Australia
Richmond is a leading Australian supplier of sliding gate tracks, galvanised bolt-down gate tracks, in-ground sliding gate tracks, steel gear racks and nylon gate gear racks for residential, commercial and industrial applications. Our range supports new manual sliding gate installations, automatic gate projects and maintenance of existing gate systems.
For surface-mounted installations, Richmond supplies the 1m Bolt Down Sliding Gate Track – Galvanised (GTR091), 3m Bolt Down Sliding Gate Track – Galvanised (GTR010) and 3m Bolt Down Sliding Gate Track – V Groove – Galvanised (GTR280). The 5.8m In-Ground Sliding Gate Track (GTR046) provides a recessed installation option.
For automated sliding gates, our range includes the Steel Gear Rack (GTR039), Nylon Gear Rack (GTR020) and 4 x 1M Bolt on Gear Racks – Nylon (GTR092). Richmond also supplies compatible track joiners, mounting anchors, drilling accessories and aluminium guide channels for suitable installation requirements.
Complete your sliding gate installation with Sliding Gate Track Wheels, Sliding Rollers and Guides and Sliding Gate Motors. Explore our wider Sliding Gate Motors & Hardware range for additional components.
Backed by Australia-wide supply, product expertise and in-house engineering capability, Richmond supports gate manufacturers, installers, maintenance contractors and industrial buyers with practical sliding gate hardware solutions.
Browse Richmond’s Sliding Tracks and Gear Racks range, or contact Richmond for assistance selecting suitable gate tracks, gear racks, mounting fasteners and compatible sliding gate hardware.