The GTR055 provides PIN-code access to compatible automatic gate motors, with four wireless channels and battery power.
PIN-code entry: Enter a four-digit code to operate a paired gate motor without using a handheld remote.
Four wireless channels: Separate channel codes allow the keypad to be set up for compatible gate or garage motors. Channel 4 provides pedestrian entry on compatible Richmond sliding gate motors.
Battery-powered keypad: Runs on 2 x AAA 1.5V batteries, so the keypad does not need a wired power connection.
30m line-of-sight range: Communicates at 433.92MHz over a stated range of 30m with direct line of sight.
Changeable access codes: Four-digit channel PINs and the six-digit master PIN can be changed using the keypad.
Clear plastic cover: A clear cover sits over the keypad buttons.
Description
The GTR055 Wireless Gate Access Keypad lets users operate a compatible automatic gate by entering a four-digit PIN. It is powered by 2 x AAA 1.5V batteries and transmits at 433.92MHz, giving you a fixed access point without running a power cable to the keypad.
Four channels allow separate codes to be assigned to compatible motors. For a compatible Richmond sliding gate motor, one of channels 1 to 3 is paired for normal gate operation, while channel 4 is automatically paired for pedestrian entry. The remaining channels can be used with additional compatible gate or garage motors.
The keypad pairs directly with Richmond GTR156, GTR212, GTR061 and GTR207 motors. The listed Richmond swing motors require a GTR197 external receiver. Check the motor model before ordering, and position the keypad within the stated 30m direct line-of-sight range.
A clear plastic cover sits over the buttons. Channel codes and the master PIN can be changed at the keypad; change the factory codes during setup and keep the master PIN for those responsible for managing access.
Operating frequency (MHz)
433.92
Wireless channels
4
Stated operating range (m)
30, with direct line of sight
Power supply
2 x AAA 1.5V batteries
Channel PIN length
4 digits
Master PIN length
6 digits
Cover
Clear plastic
Direct motor compatibility
Richmond GTR156, GTR212, GTR061 and GTR207
Motors via GTR197
Richmond GTR099, GTR058, GTR062, GTR078, GTR500, GTR501, GTR502 and GTR503
Pedestrian-entry channel
Channel 4, for compatible Richmond sliding gate motors
Our Stainless Excel Series castors offer the same European design pressed metal
frame with a 304 stainless finish and bearings suited to wet and hygiene environments